Turbine 26.4.3 Upgrade Instructions

Use these instructions to upgrade your instance to Turbine 26.4.3. The instructions are organized into subsections of this document that will help you upgrade based on your installation type, whether you have an embedded or existing cluster installation.

End of Support for Red Hat Enterprise Linux 8 (RHEL 8)

RHEL 8 is no longer a supported operating system for Turbine. Beginning with Turbine 26.0.3, Kubernetes is updated to version 1.33, which does not support RHEL 8 (specifically, Linux kernel versions 4.18 and earlier). All customers running RHEL 8 must upgrade to RHEL 9 before upgrading to Turbine version 26.0.3 or greater. You can use the following to determine your host's current RHEL version: cat /etc/redhat-release

Upgrade Turbine on Embedded Cluster Installations

Use the following instructions to upgrade Turbine on an embedded cluster installation.

Prerequisites

Turbine version 26.3.3

MongoDB 8.0.24

Important: Swimlane recommends performing a MongoDB backup before starting this update. For more information, see Backup and Restore on an Embedded Cluster with SnapshotsBackup and Restore on an Embedded Cluster with Snapshots.

1. Upgrade Instructions

1.1 SSH into any node in your deployment.

1.2 Scale down EKCO and kotsadm-rqlite

kubectl -n kurl scale deployment ekc-operator --replicas=0 kubectl -n default scale statefulset kotsadm-rqlite --replicas=0

Note: EKCO and kotsadm-rqlite will automatically scale back up after the script in Step 1.3 completes.

1.3 Run the Turbine Platform Installer upgrade

curl -sSL https://kurl.sh/turbine-turbine-26-4-3 | sudo bash -s ha

Note: If SELinux, a firewall, or a proxy is configured, append the following to the command:

installer-spec-file=se.yaml

The se.yaml file is an installer patch file created as described here: https://docs.swimlane.com/turbine-installer/overriding-installer-settings

2. Complete the upgrade from the UI

Go to the Version History tab and click Check For Updates.

In the pop-up window, click Go to the updated version, then click Configure.

Click Deploy on version 26.4.3 with the highest sequence number.

Once the Application tab shows ‘Ready’, your upgrade is complete.

Upgrade Turbine on Existing Cluster Installations

Prerequisites:

Turbine version 26.3.3

MongoDB 8.0.24

Kubernetes 1.35.7

KOTS kubectl plugin 1.130.9

Velero 1.18.2

Important! Swimlane recommends that you perform a MongoDB backup before starting this update. For more information, see Backup and Restore on an Existing Cluster with SnapshotsBackup and Restore on an Existing Cluster with Snapshots. Upgrade KOTS add-on and KOTS app

1. Prepare the Swimlane Turbine Installer kubectl add-on

1.1 Download the add-on for your OS

Linux (AMD64)

curl -LO https://github.com/replicatedhq/kots/releases/download/v1.130.9/kots_linux_amd64.tar.gz

macOS (Apple Silicon / ARM64)

curl -LO https://github.com/replicatedhq/kots/releases/download/v1.130.9/kots_darwin_arm64.tar.gz

1.2 Untar the downloaded file

tar -zxf <file-name>.tar.gz

1.3 Rename the kots binary to kubectl-kots

mv kots kubectl-kots

1.4 Move the kubectl-kots binary into your PATH (e.g. /usr/local/bin/)

sudo mv kubectl-kots /usr/local/bin/

1.5 Run the upgrade command

kubectl kots admin-console upgrade -n <namespace>

2. Complete the upgrade from the UI

Go to the Version History tab — you will see version 26.4.3.

Click Deploy once the preflight checks have completed.

Update the Elasticsearch configuration:

Configure the persistent volume size and storage class

Recommended sizes: 8GB / 16GB / 32GB for small/medium/large environments

Once the Application tab shows ‘Ready’, your upgrade is complete.

💡 Note: Replace <file-name> with:

kots_linux_amd64

kots_darwin_arm64

Upgrade Turbine on Embedded Airgap Cluster Installations

Prerequisites

Turbine version 26.3.3 If you are not on a version that is >= 25.5.0, contact your Swimlane support representative.

MongoDB 8.0.24

Links to the Offline Installer Package and Offline Airgap Bundle If you do not have these, contact your Swimlane support representative.

Important! Swimlane recommends that you perform a MongoDB backup prior to starting this update. For more information, see Backup and Restore on an Embedded Cluster with SnapshotsBackup and Restore on an Embedded Cluster with Snapshots.

1. Upgrade Instructions

1.1 Copy the latest offline installer package to each airgapped server

1.2 Untar the offline installer package on each server

tar -xzvf turbine-26.4.3.tar.gz

1.3 Run the Turbine Platform Installer update on any node in your deployment

cat install.sh | sudo bash -s airgap ha

Provide the absolute path for kubernetes-1.35.7.tar.gz, downloaded as part of step 2, when prompted during installation.

1.4 Run load-images script on all nodes (for HA clusters)

Once the installation is complete, if you have a multi-node (HA) cluster, the script prompts you to run an additional command on every node.

Run this script on node swimlane-2 to load required images before proceeding:

cat ./tasks.sh | sudo bash -s load-images

You will be prompted:

Have images been loaded on node swimlane-2? (Y/n)

Run the following on nodes two (2) and three (3) before proceeding to run the command on node one (1):

cat ./tasks.sh | sudo bash -s load-images

This command can be run simultaneously on nodes 2 and 3.

Once the load-images script completes, press Enter on node 1 and then upload the airgap bundle to the SPI dashboard.

1.5 Complete the upgrade

When the upgrade script completes, press Enter on node 1 and then upload the airgap bundle to the SPI dashboard.

Go to the Version History tab and click Upload a new version, then browse to the turbine-26.4.3.airgap file and click Upload.

The sequence number “_XXX” of the airgap file may be higher than shown if a new sequence has been published.

Once the upload of the airgap completes, refresh the page or switch tabs to see the status of the new file extraction.

Go back to the Version History tab and click Deploy on the new 26.4.3 version at the top of the versions list.

Once the Application tab shows ‘Ready’, your upgrade is complete.

Upgrade Turbine on Existing Airgap Cluster Installations

Prerequisites

Turbine version 26.3.3

MongoDB 8.0.24

Kubernetes 1.35.7

KOTS kubectl plugin 1.130.9

Velero 1.18.2

Turbine 26.4.3 airgap bundle from Swimlane

Contact your Swimlane support representative if you do not have a download link for the airgap bundle.

1. Upgrade KOTS plugin and KOTS app

1.1 Download the latest SPI Kubectl Add-on

See kots documentation for how to do so. A versioned link will look like this (Linux AMD64):

curl -LO https://github.com/replicatedhq/kots/releases/download/v1.130.9/kots_linux_amd64.tar.gz

1.2 Download the latest SPI offline package

curl -L https://get.swimlane.io/existing-cluster/install/offline-package -o kotsadm.tar.gz

1.3 Copy the SPI Kubectl Add-on and SPI offline package to your jumpbox

scp kots_<OS version>.tar.gz user@<swimlaneDNS>:/tmp/kots_<OS version>.tar.gz scp kotsadm.tar.gz user@<swimlaneDNS>:/tmp/kotsadm.tar.gz

1.4 Untar the SPI Kubectl Add-on

tar -zxvf kots_<OS version>.tar.gz

1.5 Rename or remove the original kubectl-kots file

rm /usr/local/bin/kubectl-kots

1.6 Rename and move the latest SPI Kubectl Add-on file to /usr/local/bin/

mv kots kubectl-kots sudo mv kubectl-kots /usr/local/bin/

1.7 Push the SPI (kotsadm) images to your registry

kubectl kots admin-console push-images kotsadm.tar.gz <your-registry-endpoint>/<your-registry-name> \ --registry-username <username> --registry-password <password>

1.8 Upgrade the Swimlane Platform Installer (SPI)

kubectl kots admin-console upgrade \ --kotsadm-registry <your-registry-endpoint>/<your-registry-name> \ --registry-username <username> \ --registry-password <password> \ -n <namespace>

When the SPI upgrade is complete, upload the Turbine airgap bundle to the SPI dashboard.

2. Complete the upgrade from the UI

Go to the Version History tab and click Upload a new version, then browse to the turbine-26.4.3.airgap file and click Upload.

The sequence number “_xxx” of the airgap file may be higher than shown if a new sequence has been published.

Once the upload completes, refresh the page or switch tabs to see the status of the file extraction.

Go to the Version History tab — you will see version 26.4.3, then click Configure.

Click Deploy on the new 26.4.3 version at the top of the versions list.

Once the Application tab shows ‘Ready’, your upgrade is complete.

General Note

If you face any issues downloading Kubernetes:

Download and copy kubernetes-1.35.7.tar.gz on each server. The file can be downloaded on the jump server using:

curl -LO https://kurl.sh/bundle/version/v2026.10.07-0/turbine-stable-multitenant/packages/kubernetes-1.35.7.tar.gz

Known Issue

Application Field Limit Stays at 500 After Upgrade — After you upgrade to 26.4.3, tenants whose largest application or applet already has 500 or more search-indexed fields are raised automatically to peak + 100. If a tenant still shows 500 and Application Builder blocks new indexed fields, a Super Admin can open Tenant Settings > System and raise Application Field Limit, or you can restart the swimlane-tasks pod so the check runs again.

Tasks and API Pods Do Not Reach Running State — After deploying or upgrading Turbine On-Prem 26.2.2, the swimlane-tasks and swimlane-api pods can remain stuck in init while waiting for the swimlane-tenant service. This can occur even when swimlane-tenant pods report healthy liveness and readiness checks but the service is not yet accepting requests. The issue is sporadic and does not affect every environment. Workaround: Restart the swimlane-tenant deployment so the Kubernetes service routes traffic to the new pods; swimlane-tasks and swimlane-api should then start normally.

Turbine 26.4.3 Upgrade Instructions

﻿End of Support for Red Hat Enterprise Linux 8 (RHEL 8)﻿

Upgrade Turbine on Embedded Cluster Installations

Prerequisites

1. Upgrade Instructions

2. Complete the upgrade from the UI

Upgrade Turbine on Existing Cluster Installations

1. Prepare the Swimlane Turbine Installer kubectl add-on

2. Complete the upgrade from the UI

Upgrade Turbine on Embedded Airgap Cluster Installations

Prerequisites

1. Upgrade Instructions

Upgrade Turbine on Existing Airgap Cluster Installations

Prerequisites

1. Upgrade KOTS plugin and KOTS app

2. Complete the upgrade from the UI

General Note

Known Issue

End of Support for Red Hat Enterprise Linux 8 (RHEL 8)